|
CMS Pixel Detector
Miscellaneous
|
|
Phase 1
Phase 2
|
|
Layer 1 Replacement
Layers 2-4
|
| Layer 1 Replacement Elog |
Not logged in |
 |
|
|
|
|
|
Message ID: 37
Entry time: Wed Nov 27 21:50:02 2019
Reply to this: 39
|
| Author: |
Dinko Ferencek |
| Category: |
Software |
| Subject: |
Reorganized pXar configuration files for pixel modules |
|
|
Due to different DAC settings needed for PROC V3 and V4, a single folder containing module configuration files cannot cover both ROC types. To address this problem, the existing folder 'tbm10d' in /home/l_tester/L1_SW/pxar/data/ containing configuration for PROC V4 was renamed to 'tbm10d_procv4' and a new folder for PROC V3, 'tbm10d_procv3', was created. For backward compatibility, a symbolic link 'tbm10d' was created that points to 'tbm10d_procv4'.
The difference in the configurations is in the CtrlReg DAC value which is 9 for V3 and 17 for V4.
The following lines were also added in the [defaultParameters] section in /home/l_tester/L1_SW/elComandante/config/elComandante.conf
tbm10d_procv3: tbm10d_procv3
tbm10d_procv4: tbm10d_procv4 |