ELOG Layer 1 Replacement

Layer 1 Replacement Elog, Page 1 of 16

Not logged in

Full | Summary | Threaded

Error: Attribute "Type" for quick filter not found 303 Entries

Goto page 1, 2, 3 ... 14, 15, 16 Next All

ID	Date	Author	Category	Subject	Text
309	Mon Jan 25 13:03:22 2021	Dinko Ferencek	POS	POS configuration files created	The output POS configuration files has '_Bpix_' instead of '_BPix_' in their names. The culprit was identified to be the C3 cell in the 'POS'
308	Tue Jan 19 15:12:12 2021	Dinko Ferencek	POS	POS configuration files created	M1560 in position bpi_sec1_lyr1_ldr1_mod3 was replaced by M1613.
307	Mon Jan 18 13:53:44 2021	Andrey Starodumov	Other	DTB tests	M2217 --->DTB 154 (one of the red cold box setup): - flat cable (with HV):
306	Tue Nov 10 00:50:47 2020	Dinko Ferencek	POS	POS configuration files created	[quote="danek kotlinski "][quote="Dinko Ferencek"]pXar parameter files were converted to POS configuration files by executing the following commands
305	Fri Nov 6 07:28:42 2020	danek kotlinski	POS	POS configuration files created	[quote="Dinko Ferencek"]pXar parameter files were converted to POS configuration files by executing the following commands on the
304	Fri Oct 23 13:33:04 2020	danek kotlinski	Module transfer	L1 & L2 modules to go to P5	The following modules will be transported to CERN/P5 as spares.
303	Fri Sep 18 15:45:21 2020	Andrey Starodumov	Other	M2211 and M2122	I made a mistake and instead M2122 used ID M2211 in the .ini file. Hence now we do not have entry for M2122
302	Sat Sep 12 23:45:56 2020	Dinko Ferencek	POS	POS configuration files created	pXar parameter files were converted to POS configuration files by executing the following commands on the lab PC at PSI
301	Wed Sep 2 16:09:24 2020	Matej Roguljic	Modules for P	M1595 switch with M1558	Module 1595 was foreseen to go on the inner ladder 5, position -2 (negative two). During the pre-installation test, we saw it had
300	Fri Aug 28 14:07:24 2020	Andrey Starodumov	PhQualification	M1539	There is no new PH optimisation for this module?! To be checked!
299	Fri Aug 28 12:02:48 2020	Andrey Starodumov	XRay HR tests	M1599	ROC5 has eff=93.65% and should be graded C. Somehow efficiency was not taken into account for HR test grading???
298	Fri Aug 28 11:53:23 2020	Andrey Starodumov	PhQualification	M1555	There is no new PH optimisation for this module?! To be checked!
297	Fri Aug 28 11:13:33 2020	Andrey Starodumov	Module grading	M1615	M1615: one pixel in ROC10 unmaskable hence should be graded C. Otherwise the module is of grade A
296	Fri Aug 14 13:47:26 2020	Andrey Starodumov	General	new PH optimisation test and Total Overview	New PH optimisation is done at -20C as a FT, hence the results of this test are added to "DB" file as the second m20_1 test.
295	Wed Jul 29 17:19:43 2020	danek kotlinski	PhQualification	Change configuration for PH qialification	Preparing the new PH optimization I had to make the following modifications:
294	Fri Jul 10 11:24:37 2020	Urs Langenegger	Reception test	proc600V3 modules	This week I tested 12 modules built with proc600v3. The module numbers are M1722 - M1733. The results are summarized at the usual place:
293	Sun Jul 5 13:20:55 2020	Dinko Ferencek	General	Disk cleanup on the lab PC (pc11366.psi.ch)	Home folder was cleaned up by deleting old pXar output .log and .root files. The full list is in the attached file. This released
292	Thu Jul 2 13:48:20 2020	danek kotlinski	Module transfer	Transport #7 to ETH	Lea brought the last batch of 8 modules to ETH: 1542
291	Thu Jun 18 20:04:41 2020	danek kotlinski	Module transfer	Modules to ETH, transport #6	Today Lea has delivered another group of 18 modules to the ETH: 1604
290	Tue Jun 16 19:23:37 2020	danek kotlinski	Module transfer	modules from and to ETH, list 3	The 27 modules from list 2 have been transferred back to PSI.

Goto page 1, 2, 3 ... 14, 15, 16 Next All

ELOG V3.1.3-7933898