| ID |
Date |
Author |
Category |
Subject |
Text |
 |
|
47
|
Mon Jan 20 21:33:20 2020 |
Dinko Ferencek | Cold box tests | Latest tests of PH optimization | We did some tests by running the latest version
of pXar on modules M1521, M1529, M1534 and
M1536, specifically trimming and PH optimization. |
|
|
46
|
Mon Jan 20 18:09:50 2020 |
Matej Roguljic | General | Activities 20.-31.01.2020. | 20.01.
Expanded the HDI testing setup to be able |
|
|
45
|
Mon Jan 20 13:47:33 2020 |
Dinko Ferencek | Software | pXar code updated | [quote="Dinko Ferencek"][quote="Dinko Ferencek"]pXar
code in /home/l_tester/L1_SW/pxar/ on the
lab PC was updated on Monday, Nov. 25 from |
|
|
44
|
Tue Dec 3 12:15:54 2019 |
Andrey Starodumov | Full test | 4 modules FT | [quote="Andrey Starodumov"]FullQualification
of four modules M1526, M1529, M1521 and M1534
has been done. Full time of the test is about |
|
|
43
|
Mon Dec 2 17:29:06 2019 |
Andrey Starodumov | Full test | 4 modules FT | FullQualification of four modules M1526, M1529,
M1521 and M1534 has been done. Full time
of the test is about 5.5hrs.
|
|
|
42
|
Fri Nov 29 17:06:26 2019 |
Dinko Ferencek | General | Dropbox folder on CERNBox set up | A dropbox folder for elComandante tar files
was set up in my CERNBox and synchronized
with the following local folder on the lab |
|
|
41
|
Thu Nov 28 18:58:30 2019 |
Dinko Ferencek | Software | Updated Fulltest configuration | The Fulltest definition used on the lab PC
and stored in /home/l_tester/L1_SW/elComandante/config/tests/Fulltest
had the following content
|
|
|
40
|
Thu Nov 28 18:34:00 2019 |
Dinko Ferencek | Software | pXar code updated | [quote="Dinko Ferencek"]pXar code in /home/l_tester/L1_SW/pxar/
on the lab PC was updated on Monday, Nov.
25 from [URL=https://github.com/psi46/pxar/tree/e17df08c7bbeb8472e8f56ccd2b9d69a113ccdc3]https://github.com/psi46/pxar/tree/e17df08c7bbeb8472e8f56ccd2b9d69a113ccdc3[/URL] |
|
|
39
|
Thu Nov 28 18:23:31 2019 |
Dinko Ferencek | Software | Reorganized pXar configuration files for pixel modules | [quote="Dinko Ferencek"]Due to different DAC
settings needed for PROC V3 and V4, a single
folder containing module configuration files |
|
|
38
|
Thu Nov 28 15:58:20 2019 |
Matej Roguljic | General | Activities 26.-29.11.2019. | 26.11.
Prepared the tools for RD53A digital module |
|
|
37
|
Wed Nov 27 21:50:02 2019 |
Dinko Ferencek | Software | Reorganized pXar configuration files for pixel modules | Due to different DAC settings needed for PROC
V3 and V4, a single folder containing module
configuration files cannot cover both ROC |
|
|
36
|
Wed Nov 27 18:25:08 2019 |
Dinko Ferencek | Software | pXar code updated | pXar code in /home/l_tester/L1_SW/pxar/ on
the lab PC was updated on Monday, Nov. 25
from [URL=https://github.com/psi46/pxar/tree/e17df08c7bbeb8472e8f56ccd2b9d69a113ccdc3]https://github.com/psi46/pxar/tree/e17df08c7bbeb8472e8f56ccd2b9d69a113ccdc3[/URL] |
|
|
35
|
Wed Nov 27 08:39:24 2019 |
Matej Roguljic | Cold box tests | Bump bonding test investigation | The BB test on M1534 shows a lot of dead bunmps
on C10 and some on C1 and C0 as well. Putting
a source on top of the module shows that |
|
|
34
|
Wed Nov 20 16:53:50 2019 |
Andrey | Full test | M1533 and M1534 FullQualification | FullQualification of two modules M1533 and
M1534 has been done. Full time of the test
is about 7hrs.
|
|
|
33
|
Tue Nov 19 14:10:10 2019 |
Andrey | Cold box tests | new modules M1533 and M1534 | Yesterday Silvan wire bonded two new modules
M1533 and M1534 that are both grade C due
to high leakage current and a few ROCs with |
|
|
31
|
Thu Oct 31 10:41:12 2019 |
Matej Roguljic | Cold box tests | Issue with DTB_WWVASW | On 29th of October, an issue with DTB_WWVASW
was noticed when trying to run FullQualification
on 4 modules at the same time. On a tested, |
|
|
30
|
Wed Oct 30 16:54:58 2019 |
Matej Roguljic | Software | Investigating the bug with the Keithley client | [quote="Matej Roguljic"][quote="Matej Roguljic"]We
took module 1529 and tried recreating the
issue observed in the beginning of October. |
|
|
27
|
Wed Oct 30 10:38:04 2019 |
Matej Roguljic | General | Activities 28.-31.10.2019. | 28.10. - Investigated a problem with the FullQualification
setup, described more in this [URL=https://elrond.irb.hr/elog/Layer+1+Replacement/23]note[/URL]
29.10. - Further investigated the aforementioned |
|
|
26
|
Tue Oct 29 16:38:32 2019 |
Matej Roguljic | Software | Investigating the bug with the Keithley client | [quote="Matej Roguljic"]We took module 1529
and tried recreating the issue observed in
the beginning of October. To do this in a |
|
|
25
|
Tue Oct 29 16:36:23 2019 |
Matej Roguljic | Module assembly | Assembly lab cap gluing jigs | There are two jigs for cap gluing in the assembly
lab, circled in red and blue on the photo
in the attachment. The one closer to the |
|