| ID |
Date |
Author |
Category |
Subject |
Text |
 |
|
204
|
Thu Apr 9 14:49:07 2020 |
Andrey Starodumov | Reception test | RT of M1650 failed | Module has been tested on April 2nd.
Under Molex connector in ROC12 471 dead or
noisy pixels.
|
|
|
207
|
Thu Apr 9 17:36:31 2020 |
Andrey Starodumov | Reception test | RT of M1671 failed | ROC12-ROC15 no hits.
A candidate to TBM0 substitution, hence Grade
C*.
|
|
|
209
|
Tue Apr 14 15:49:05 2020 |
Andrey Starodumov | Reception test | RT of M1623, M1657, M1673, M1674 | M1623: Grade A, should be B due to 71 bump
defects in ROC4
M1657: Grade B, due to 51 dead pixels in |
|
|
220
|
Mon Apr 20 15:20:07 2020 |
Andrey Starodumov | Reception test | Change TBMs on M1635, M1653, M1671 | [quote="Andrey Starodumov"]M1635: no data
from ROC8-ROC11 => change TBM1
M1653: ROC12-ROC15 not programmable => change |
|
|
294
|
Fri Jul 10 11:24:37 2020 |
Urs Langenegger | Reception test | proc600V3 modules | This week I tested 12 modules built with proc600v3.
The module numbers are M1722 - M1733.
The results are summarized at the usual place: |
|
|
95
|
Tue Mar 3 14:05:13 2020 |
Andrey Starodumov | Re-grading | Regrading C modules: due to Noise | It has been realized by Urs that VCal to electron
conversion used by MoreWeb is still 50e/VCal.
While recent calibration done by Maren with |
|
|
97
|
Wed Mar 4 16:00:05 2020 |
Andrey Starodumov | Re-grading | Regrading C M1591: due to Noise | [quote="Andrey Starodumov"]It has been realized
by Urs that VCal to electron conversion used
by MoreWeb is still 50e/VCal.
|
|
|
103
|
Wed Mar 11 17:59:48 2020 |
Andrey Starodumov | Re-grading | Regrading C M1542: due to Noise | Follow the instruction from M1591 regrading
log:
"To correct the Summary page one needs to |
|
|
132
|
Tue Mar 24 18:11:52 2020 |
Andrey Starodumov | Re-grading | Reanalised test results | Test resulsts of several modules have been
re-analised without grading on trimbit failure.
|
|
|
139
|
Wed Mar 25 18:31:46 2020 |
Andrey Starodumov | Re-grading | Reanalised test results | [quote="Andrey Starodumov"]Test resulsts of
several modules have been re-analised without
grading on trimbit failure.
|
|
|
278
|
Fri May 29 13:56:35 2020 |
Andrey Starodumov | Re-grading | M1630 | In ROC1 of M1630 gain calibration failed massively
(3883 pixels) at +10C with CtrlReg 9.
A special test of M1630 only at +10C and |
|
|
109
|
Mon Mar 16 11:04:41 2020 |
Matej Roguljic | PhQualification | PhQualification 14.-15.3. | I ran PhQualification over the weekend with
changes pulled from git (described here https://elrond.irb.hr/elog/Layer+1+Replacement/108).
|
|
|
111
|
Mon Mar 16 15:20:03 2020 |
Matej Roguljic | PhQualification | PhQualification on 16.3. | PhQualification was run on modules M1561,
M1564, M1565, M1566. |
|
|
295
|
Wed Jul 29 17:19:43 2020 |
danek kotlinski | PhQualification | Change configuration for PH qialification | Preparing the new PH optimization I had to
make the following modifications:
|
|
|
298
|
Fri Aug 28 11:53:23 2020 |
Andrey Starodumov | PhQualification | M1555 | There is no new PH optimisation for this module?!
To be checked! |
|
|
300
|
Fri Aug 28 14:07:24 2020 |
Andrey Starodumov | PhQualification | M1539 | There is no new PH optimisation for this module?!
To be checked! |
|
|
302
|
Sat Sep 12 23:45:56 2020 |
Dinko Ferencek | POS | POS configuration files created | pXar parameter files were converted to POS
configuration files by executing the following
commands on the lab PC at PSI
|
|
|
305
|
Fri Nov 6 07:28:42 2020 |
danek kotlinski | POS | POS configuration files created | [quote="Dinko Ferencek"]pXar parameter files
were converted to POS configuration files
by executing the following commands on the |
|
|
306
|
Tue Nov 10 00:50:47 2020 |
Dinko Ferencek | POS | POS configuration files created | [quote="danek kotlinski "][quote="Dinko Ferencek"]pXar
parameter files were converted to POS configuration
files by executing the following commands |
|
|
308
|
Tue Jan 19 15:12:12 2021 |
Dinko Ferencek | POS | POS configuration files created | M1560 in position bpi_sec1_lyr1_ldr1_mod3
was replaced by M1613.
|
|