ELOG Layer 1 Replacement

Layer 1 Replacement Elog, Page 6 of 16

Not logged in

Find | Login | Help

New entries since:

Thu Jan 1 01:00:00 1970

Full | Summary | Threaded

Error: Attribute "Type" for quick filter not found 303 Entries

Goto page Previous 1, 2, 3 ... 5, 6, 7 ... 14, 15, 16 Next All

ID	Date	Author	Category	Subject	Text
244	Thu Apr 30 17:24:57 2020	Dinko Ferencek	Software	MoReWeb empty DAC plots	[quote="Matej Roguljic"]Some of the DAC parameters plots were empty in the production overview page. All the empty plots had the number
245	Thu Apr 30 17:33:04 2020	Andrey Starodumov	Software	MoReWeb empty DAC plots	[quote="Matej Roguljic"]Some of the DAC parameters plots were empty in the total production overview page. All the empty plots had the
253	Thu May 7 00:10:15 2020	Dinko Ferencek	Software	MoReWeb empty DAC plots	[quote="Andrey Starodumov"][quote="Matej Roguljic"]Some of the DAC parameters plots were empty in the total production overview page. All the
53	Fri Jan 24 18:12:00 2020	Dinko Ferencek	Software	MoReWeb code updates	MoReWeb code updated to include the ROC wafer info in the XrayCalibration and XRayHRQualification pages:
76	Sun Feb 9 18:36:13 2020	Dinko Ferencek	Module grading	Manual grading	The procedure for manual grading is described in [URL=https://github.com/psi46/MoReWeb/pull/120]https://github.com/psi46/MoReWeb/pull/120[/URL].
303	Fri Sep 18 15:45:21 2020	Andrey Starodumov	Other	M2211 and M2122	I made a mistake and instead M2122 used ID M2211 in the .ini file. Hence now we do not have entry for M2122
249	Mon May 4 15:28:14 2020	Andrey Starodumov	General	M1660	M1660 is taken from gel-pak and cabled for retest. This module was graded C only at second FT
183	Fri Apr 3 17:39:19 2020	Andrey Starodumov	Module doctor	M1654	After a protection cap glued to M1654, I observed a few strongly bent wire bonds and probably some shorts on ROC8. One (VD+) of them is
177	Fri Apr 3 13:55:48 2020	Andrey Starodumov	Reception test	M1653 failed Reception	Roc12-15 are not programmable. Visual inspection is Ok, nothing found. To module doctor!
173	Thu Apr 2 17:06:19 2020	Andrey Starodumov	Reception test	M1652 failed Reception	ROC1 of M1652 is not programmable. Put in the "Bad" tray as C module.
170	Wed Apr 1 14:36:37 2020	Andrey Starodumov	Reception test	M1646 failed Reception	M1646 showed Idig=1A, ROC6 is not programmable. Visual inspection: scratch on a periphery (between bonding pads) of ROC6.
164	Tue Mar 31 10:32:32 2020	Urs Langenegger	Full test	M1637	Maybe M1637 has an issue: It got stuck twice at the same place with
152	Fri Mar 27 17:27:09 2020	Andrey Starodumov	Reception test	M1635 failed Reception	All ROCs are programmable but DESER400 trailer error bits: "NO DATA" or "IDLE DATA". ROC8-11 are affected (no data)
242	Thu Apr 30 15:38:43 2020	danek kotlinski	Module transfer	M1635 & M1671 transferred to gel-pack	Two bad modules have been placed in gel-packs: 1635 & 1671.
148	Fri Mar 27 14:28:14 2020	Andrey Starodumov	Reception test	M1633 failed Reception	All ROCs are programmable but permanent DESERALISER ERROR, Ch6 and Ch7 event ID mismatch. Visual inspection is OK
210	Tue Apr 14 16:54:31 2020	Andrey Starodumov	Other	M1633 cable disconnected	We do not have any more module holders. M1633 was in "Module doctor" tray. I took module off the holder and put it in
278	Fri May 29 13:56:35 2020	Andrey Starodumov	Re-grading	M1630	In ROC1 of M1630 gain calibration failed massively (3883 pixels) at +10C with CtrlReg 9. A special test of M1630 only at +10C and
130	Tue Mar 24 16:08:58 2020	Andrey Starodumov	Reception test	M1625 failed Reception	M1625: all ROCs are programmable but no readout from ROC0-ROC3. The same symptom as for M1623.
128	Tue Mar 24 15:20:18 2020	Andrey Starodumov	Reception test	M1623 failed Reception	M1623: all ROCs are programmable but no readout from ROC0-ROC3. Visual inspection is OK.
127	Tue Mar 24 15:18:59 2020	Andrey Starodumov	Reception test	M1621 failed Reception	On M1621 ROC8 is not programmable.

Goto page Previous 1, 2, 3 ... 5, 6, 7 ... 14, 15, 16 Next All

ELOG V3.1.3-7933898