| ID |
Date |
Author |
Category |
Subject |
Text |
 |
|
168
|
Tue Mar 31 18:14:47 2020 |
Andrey Starodumov | HDI test | 3 HDI tested | HDIs: 1027, 5002, 5003 are tested. All OK. |
|
|
167
|
Tue Mar 31 17:36:36 2020 |
Urs Langenegger | Full test | exchanged adapter for DTB_WXC03A | [quote="Urs Langenegger"]I did not manage
to get any r/o from the module connected
to that adapter, also after exchanging the |
|
|
166
|
Tue Mar 31 17:33:37 2020 |
Andrey Starodumov | Reception test | RT of M1546 | This is a module with a broken TBM. Silvan
put a new one on top of the broken TBM.
The module is graded A after reception test.
|
|
|
165
|
Tue Mar 31 17:32:47 2020 |
Andrey Starodumov | Reception test | RT of M1641-M1644 | All modules graded A. |
|
|
164
|
Tue Mar 31 10:32:32 2020 |
Urs Langenegger | Full test | M1637 | Maybe M1637 has an issue: It got stuck twice
at the same place with
|
|
|
163
|
Tue Mar 31 09:29:02 2020 |
Urs Langenegger | Full test | exchanged adapter for DTB_WXC03A | I did not manage to get any r/o from the module
connected to that adapter, also after exchanging
the module.
|
|
|
162
|
Tue Mar 31 08:21:39 2020 |
Andrey Starodumov | Full test | FT of 1558, 1606, 1634, 1636 on Mar 30 | M1558: B
M1606: C again due to trimmed threshold for
189 pixels of ROC2 at -20C. Second time at |
|
|
161
|
Tue Mar 31 06:54:12 2020 |
danek kotlinski | Module grading | M1542 | I have tested M1542.
It looks not bad but there is a group of
pixels in the lower/left corner of ROC6 which |
|
|
160
|
Mon Mar 30 17:49:31 2020 |
Andrey Starodumov | Reception test | RT of M1637-1640 | All modules: M1637, M1638, M1639, M1649, are
graded A.
|
|
|
159
|
Mon Mar 30 17:40:35 2020 |
Andrey Starodumov | HDI test | 3+2 HDIs (re-)tested | For 3 HDIs: 3014, 3017, 6021, HV has been
re-measured. In all cases 790V is measured
with 800V supplied.
|
|
|
158
|
Mon Mar 30 16:46:59 2020 |
Andrey Starodumov | DB | Sensors missing in Advacam spreadsheet | Dinko noticed that several sensors are missing
in Advacam spreadsheet:
- 381785-03-3 used for M1586
|
|
|
157
|
Mon Mar 30 15:40:52 2020 |
Urs | Full test | FT of M1629, M1630, M1631, M1632 | M1630 is interesting because (I am using my
terminology in the following) for the test
at T=+10C ROC1 fails the PH optimization |
|
|
156
|
Mon Mar 30 14:52:59 2020 |
Danek Kotlinski | Full test | FT of M1629, M1630, M1631, M1632 | I have tested M1630.
I see not problem with ROC1. See the attached
plot.
|
|
|
155
|
Sun Mar 29 18:14:59 2020 |
danek kotlinski | Other | Modules 1544 & 1563 in gelpack | The 2 bad modules:
M1544
M1563
|
|
|
154
|
Fri Mar 27 18:29:53 2020 |
Andrey Starodumov | Full test | FT of M1629, M1630, M1631, M1632 | M1629: B due to mean noise at -20C
M1630: C due to ROC1 with all pixels failed
of PH calibration (Gain). Both FT at -20C |
|
|
153
|
Fri Mar 27 18:28:34 2020 |
Andrey Starodumov | Full test | 4 HDIs tested | HDIs 5020, 5018, 1044 and 1041 are OK |
|
|
152
|
Fri Mar 27 17:27:09 2020 |
Andrey Starodumov | Reception test | M1635 failed Reception | All ROCs are programmable but DESER400 trailer
error bits: "NO DATA" or "IDLE DATA".
ROC8-11 are affected (no data)
|
|
|
151
|
Fri Mar 27 16:41:16 2020 |
Andrey Starodumov | Module doctor | Wolfram's summay from Mar 25 | [quote="Andrey Starodumov"]M1542 nothing
on sdata3 (12-15), bad output or wire-bond
M1544 ROC15 timing off, can be made to |
|
|
150
|
Fri Mar 27 14:46:04 2020 |
Andrey Starodumov | Module doctor | Wolfram's summay from Mar 25 | M1542 nothing on sdata3 (12-15), bad output
or wire-bond
M1544 ROC15 timing off, can be made to |
|
|
149
|
Fri Mar 27 14:32:11 2020 |
Andrey Starodumov | HDI test | List of suspicious HDIs | Here are HDIs that the first time tested showed
500-600V measured on the pin or directly
on the HDI pad instead of 800V:
|
|