| ID |
Date |
Author |
Category |
Subject |
Text |
 |
|
129
|
Tue Mar 24 15:41:29 2020 |
Andrey Starodumov | Module grading | Change in MoreWeb GradingParameters.cfg | On March 3d the Vcal calibration parameter
has been changed:
- StandardVcal2ElectronConversionFactor from |
|
|
142
|
Thu Mar 26 10:41:24 2020 |
danek kotlinski | Module grading | M1606 | I have looked more closely at M1606.
Trimming show problems in ROC2, 8 pixels
have 0 threshold and for 61 pixels thr=-1.
|
|
|
143
|
Thu Mar 26 15:37:18 2020 |
Urs | Module grading | M1606 | attached find the threshold difference distributions
for all four trimbits for all ROCs |
|
|
161
|
Tue Mar 31 06:54:12 2020 |
danek kotlinski | Module grading | M1542 | I have tested M1542.
It looks not bad but there is a group of
pixels in the lower/left corner of ROC6 which |
|
|
246
|
Fri May 1 19:34:01 2020 |
danek kotlinski | Module grading | M1582 | M1582 was classified as C because of 167 pixels
failing trimming in ROC1.
I have tested this module.
|
|
|
254
|
Thu May 7 00:27:41 2020 |
Dinko Ferencek | Module grading | Comment about TrimBitDifference and its impact on the Trim Bit Test | To expand on the following [URL=https://elrond.irb.hr/elog/Layer+1+Replacement/253]elog[/URL],
on Mar. 24 Andrey changed the TrimBitDifference
parameter in Analyse/Configuration/GradingParameters.cfg |
|
|
285
|
Fri Jun 5 13:47:11 2020 |
Andrey Starodumov | Module grading | M1613 | FT of this modules has been done twice: March
23 and March 25, in both cases with the final
test SW. On March 23 module was graded C |
|
|
297
|
Fri Aug 28 11:13:33 2020 |
Andrey Starodumov | Module grading | M1615 | M1615: one pixel in ROC10 unmaskable hence
should be graded C. Otherwise the module
is of grade A
|
|
|
141
|
Wed Mar 25 20:17:16 2020 |
danek kotlinski | Module doctor | The list of modules tested today by Wolfram | M1542 nothing on sdata3 (12-15), bad output
or wire-bond
M1544 ROC15 timing off, can be made to |
|
|
150
|
Fri Mar 27 14:46:04 2020 |
Andrey Starodumov | Module doctor | Wolfram's summay from Mar 25 | M1542 nothing on sdata3 (12-15), bad output
or wire-bond
M1544 ROC15 timing off, can be made to |
|
|
151
|
Fri Mar 27 16:41:16 2020 |
Andrey Starodumov | Module doctor | Wolfram's summay from Mar 25 | [quote="Andrey Starodumov"]M1542 nothing
on sdata3 (12-15), bad output or wire-bond
M1544 ROC15 timing off, can be made to |
|
|
183
|
Fri Apr 3 17:39:19 2020 |
Andrey Starodumov | Module doctor | M1654 | After a protection cap glued to M1654, I observed
a few strongly bent wire bonds and probably
some shorts on ROC8. One (VD+) of them is |
|
|
213
|
Wed Apr 15 08:48:09 2020 |
danek kotlinski | Module doctor | Wolfram's tests from 14/4/20 | two of are fixed and can be re-tested
M1623 tbm bond
M1657 bond roc 15
|
|
|
5
|
Wed Aug 7 11:49:07 2019 |
Matej Roguljic | Module assembly | HDI glue irradiation tests | Six different glues were used to glue the
cap on six dummy modules. They were all irradiated
to 120 MRad in Zagreb after which they were |
10x |
|
11
|
Wed Sep 18 15:45:45 2019 |
Matej Roguljic | Module assembly | HDI sparking under HV test | HDI [B]8010[/B] passed all test except the
HV. Under the HV test, some sparks could
be heard and even seen by eye on the right |
7x |
|
16
|
Thu Sep 26 21:48:56 2019 |
Dinko Ferencek | Module assembly | Cap gluing training | Today I performed my first cap gluing. As
an exercise it was first done on two dummy
modules and later on a pre-production module |
|
|
19
|
Fri Sep 27 23:22:02 2019 |
Dinko Ferencek | Module assembly | Cap gluing training | Attached are the bump bonding threshold maps
before and after cap gluing and the (before
- after) difference for M1522. |
|
|
20
|
Wed Oct 2 12:41:16 2019 |
Dinko Ferencek | Module assembly | First production modules assembled | First production modules (M1530, M1531, M1532)
were built on Monday, Sep. 30 2019.
|
6x |
|
25
|
Tue Oct 29 16:36:23 2019 |
Matej Roguljic | Module assembly | Assembly lab cap gluing jigs | There are two jigs for cap gluing in the assembly
lab, circled in red and blue on the photo
in the attachment. The one closer to the |
|
|
54
|
Fri Jan 24 18:16:09 2020 |
Dinko Ferencek | Module assembly | Protective cap gluing | Today I additionally practiced protective
cap gluing by adding a protective cap to
module M1536. |
|