| ID |
Date |
Author |
Category |
Subject |
Text |
 |
|
270
|
Fri May 22 16:19:01 2020 |
Andrey Starodumov | Software | Change in MoreWeb GradingParameters.cfg | Xray noise:
grade B moved from 300e to 400e
grade C moved from 400e to 500e |
|
|
295
|
Wed Jul 29 17:19:43 2020 |
danek kotlinski | PhQualification | Change configuration for PH qialification | Preparing the new PH optimization I had to
make the following modifications:
|
|
|
217
|
Thu Apr 16 15:21:51 2020 |
Andrey Starodumov | Change TBM | Change TBMs on M1635, M1653, M1671 | M1635: no data from ROC8-ROC11 => change TBM1
M1653: ROC12-ROC15 not programmable => change
TBM0
|
|
|
220
|
Mon Apr 20 15:20:07 2020 |
Andrey Starodumov | Reception test | Change TBMs on M1635, M1653, M1671 | [quote="Andrey Starodumov"]M1635: no data
from ROC8-ROC11 => change TBM1
M1653: ROC12-ROC15 not programmable => change |
|
|
16
|
Thu Sep 26 21:48:56 2019 |
Dinko Ferencek | Module assembly | Cap gluing training | Today I performed my first cap gluing. As
an exercise it was first done on two dummy
modules and later on a pre-production module |
|
|
19
|
Fri Sep 27 23:22:02 2019 |
Dinko Ferencek | Module assembly | Cap gluing training | Attached are the bump bonding threshold maps
before and after cap gluing and the (before
- after) difference for M1522. |
|
|
88
|
Mon Feb 24 14:01:29 2020 |
Urs Langenegger | Module assembly | Cap gluing in W8 | In week 8 the following modules were glued
and tested:
|
|
|
63
|
Tue Feb 4 19:51:10 2020 |
Dinko Ferencek | Module assembly | Cap gluing | Today protective caps have been glued to modules
1545, 1547, 1548, 1549, and 1550. |
|
|
75
|
Sun Feb 9 12:05:47 2020 |
Dinko Ferencek | Module assembly | Cap gluing | Today protective caps have been glued to modules
1561 and 1562. |
|
|
175
|
Thu Apr 2 17:10:08 2020 |
Andrey Starodumov | Other | Cap glued to M1618 | M1618 has been tested (FT ) on March 23 without
a protection cap.
I have no idea how it's happened...
|
|
|
35
|
Wed Nov 27 08:39:24 2019 |
Matej Roguljic | Cold box tests | Bump bonding test investigation | The BB test on M1534 shows a lot of dead bunmps
on C10 and some on C1 and C0 as well. Putting
a source on top of the module shows that |
|
|
64
|
Tue Feb 4 19:52:22 2020 |
Dinko Ferencek | Cold box tests | Blue coldbox setup for reception tests commissioned | Today I continued where Matej left off with
commissioning the blue coldbox setup for
reception tests. All the necessary software |
|
|
49
|
Wed Jan 22 11:39:48 2020 |
Dinko Ferencek | Software | BB2 configuration | When attempting to run the FullQualification
this morning, pXar crashed while running
the BB2 test. After some investigation, we |
|
|
25
|
Tue Oct 29 16:36:23 2019 |
Matej Roguljic | Module assembly | Assembly lab cap gluing jigs | There are two jigs for cap gluing in the assembly
lab, circled in red and blue on the photo
in the attachment. The one closer to the |
|
|
269
|
Fri May 22 16:06:43 2020 |
Andrey Starodumov | XRay HR tests | Analysis of HRT: M1623, M1632, M1634, M1636-M1639,M1640 | Module HRtest
VCal calibration Grade
#defects max #noisy pix
|
|
|
279
|
Fri May 29 15:04:04 2020 |
Andrey Starodumov | XRay HR tests | Analysis of HRT: M1555-M1561 and M1564 | Module HRtest VCal
calibration Grade
#defects max #noisy pix
|
|
|
266
|
Fri May 15 17:15:34 2020 |
Andrey Starodumov | XRay HR tests | Analysis of HRT: M1630, M1632, M1636, M1638 | Krunal proved test result of four modules
and Dinko analised them.
M1630: Grade A, VCal calibration: Slope=43.5e-/Vcal, |
|
|
18
|
Fri Sep 27 22:24:31 2019 |
Dinko Ferencek | General | Activities on 27. 9. 2019. | [LIST]
[*] Today Silvan wire bonded TBMs to the
first batch of 8 new HDIs which were then |
|
|
6
|
Wed Aug 7 12:24:14 2019 |
Matej Roguljic | Documentation | Activities 31.7.-9.8.2019. | 31.7.
Matej tested 4 HDIs (8030-8033 and 8010). |
|
|
27
|
Wed Oct 30 10:38:04 2019 |
Matej Roguljic | General | Activities 28.-31.10.2019. | 28.10. - Investigated a problem with the FullQualification
setup, described more in this [URL=https://elrond.irb.hr/elog/Layer+1+Replacement/23]note[/URL]
29.10. - Further investigated the aforementioned |
|